View Negotiation
| 22_Procurement of equipment for laboratories of VET Schools of Mykolaiv Oblast |
|---|
| Procurement Process : | RFQ - Request for quotation |
| Office : | UNDP-UKR - UKRAINE |
| Deadline : | 01-Apr-24 @ 12:00 PM (New York time) | | Published on : | 04-Mar-24 @ 12:00 AM (New York time) |
| Development Area : | OTHER  |
| Reference Number : | UNDP-UKR-00645,1 |
| Contact : | Procurement Unit - Procurement.rpp.ua@undp.org |
This specific tender is managed via the new supplier portal system of UNDP Quantum. If you are interested in submitting a bid for this tender, you must subscribe following the instructions in the user guide. If you have not registered a profile with this system, you can do so by following the link for Supplier Registration.
If you already have a supplier profile, please login to the Supplier Portal, then search for the negotiation using the reference number UNDP-UKR-00645,1, following the instructions in the user guide.
|
Introduction : Dear Bidder, The United Nations Development Programme (UNDP) in Ukraine hereby invites you to submit a Quotation to the Request for Quotation (RFQ) UNDP-UKR-00645: Procurement of equipment for radioelectronic and electromechanical laboratories of Vocational Education Training (VET) Schools of Mykolaiv Oblast. Interested suppliers must submit their offer directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document.
Additional information: - If you need support with the online system, you can contact quantum.reg.ua@undp.org. Please always indicate reference to the number of the tender in subject. - Guides for suppliers: - Bidders must send their inquiries and requests for clarifications related to Terms of Reference / Specification / Other bidding documents using the messaging functionality in the portal. - Documents can be submitted in English, Ukrainian or Russian languages. ATTENTION: Quotations shall be submitted only through Quantum Portal. Quotations shall not be submitted to any email addresses. Otherwise, such offers shall be disqualified.
United Nations Development Programme Procurement Unit |
| Amendment : The following amendments have been made to the RFQ document:
1. The deadline for submission has been extended until March 25, 2024, 17:00 (Kyiv time).
2. Annex 1_Schedule of Requirements ENG and Annex 3_Technical Offer ENG are updated in the following way:
- Position 1.6. Digital microscope:
a. Lens magnification: 500x 200X (+/-10%)
- Position 2.1. Digital radius meter:
Features:
a. Measuring range, mm – 800-9990 (+/- 10%)
b. Discreteness of reference, mm: 0.01 (+/- 10%)
c. Data output RS-232: YES
d. Indication: digital
- Position 2.2. Reversible engine:
a. Speed of rotation of the output shaft of the gearbox, rpm: 1/39.06 - 30 rpm
- Position 2.3. Oscillograph:
Features:
a. Sampling rate in real time: 2.5 MByb/s;
b. Analog bandwidth: 0~200kHz;
c. Input resistance: 1 MΩ;
d. Input mode: AC/DC;
e. Test voltage range: probe 1:1:80 Vpp (±40 V); probe 10:1:800 Vpp (±40 V);
f. Vertical sensitivity: 10 mV/del ~ 10 V/del (in steps of 1-2-5);
g. Vertical displacement: adjustable, with indication;
h. Range of vertical scanning: 10 μs/del ~ 500 s/del (in steps of 1-2-5);
i. Launch modes: automatic, normal and single;
j. Types of launch: on the rising front, on the falling front;
k. Start level: adjustable, with indication;
l. Signal freezing: yes (HOLD function);
m. Automatic measurements: maximum, minimum, average value, rms value, peak-peak, period, fill factor.
n. PWM output: frequency: 0 ~ 80 kHz, duty cycle: 0 ~ 100%, amplitude: 5.0 V
- Position 2.5. Laboratory circulating thermostat:
a. In the absence of the required specification, provide an equivalence version.
- Position 2.11. DC bridge:
a. Deleted from the list.
- Position 2.13. Resistance thermometer:
Additional Features:
a. Working environment: liquid
b. Abrasive working environment
c. Working environment does not stick to the walls of a vessel
d. Place of the sensor: on the vessel
e. Working pressure in the vessel, bar: Max 40
f. Temperature of the working environment, °C: 150
g. Ambient air temperature, °C: max 22
h. Sensor requirements: thermocouple
i. Hygienic joint: yes
j. Required type of outgoing signals: thermocouple
k. Required local indication: yes
- Position 2.19. Logometer:
a. Deleted from the list
Position 2.34. Groover:
Features:
a. JGS-750 Outer diameter of tube (inch) – ¾.
b. Knives for the groves (intervals) – 1/8х1/4х1/8̎ - SI-7503-S;
c. 1/8х3/8х1/8̎ - 7503;
d. 1/8х1/8х1/8̎ - SI-7503-SPEC
e. Drive – electrical |
Documents :
Negotiation Document(s)
(Before Accessing other negotiations Document(s), please click on this link)
|
|
