This specific tender is managed via the new supplier portal system of UNDP Quantum. If you are interested in submitting a bid for this tender, you must subscribe following the instructions in the user guide. If you have not registered a profile with this system, you can do so by following the link for Supplier Registration.
If you already have a supplier profile, please access the negotiation using quicklink or please login to the Supplier Portal, then search for the negotiation using the reference number UNDP-FJI-00618, following the instructions in the user guide.
Geotechnical Survey for selected FREF sites - Lau Province
Procurement Process
RFP - Request for proposal
Office
UNDP-FJI - FIJI
Deadline
04-Jun-25 @ 08:00 PM (New York time)
Published on
15-May-25 @ 12:00 AM (New York time)
Reference Number
UNDP-FJI-00618
Contact
Dale Kacivi - dale.kacivi@undp.org
Introduction
SCOPE OF TENDER
The following requirements outline the scope of work to be completed.
1. Site Reconnaissance and Geological Mapping
Verification of the site geology and the presence of geological structures, Structures such as faults, fractures, folding, bedding, and joints will hinder or require certain mitigation measures to be adhered to prior to commencement of any development. If required; rock samples to be obtained for further confirmation and analysis. Potential geological hazards such as slope failures to be noted and the appropriate mitigation measures provided. A reconnaissance survey to be carried out prior to survey to note down areas requiring the most attention.
2. GPS Survey
· The GPS survey is to be carried out to determine the exact location of all the investigations carried out such as the geophysics survey, the auger hole sampling sites and other geological features. It will also be useful in determining the elevation at the development site.
3. Geophysical Survey
· The survey to conducted to identify the subsurface (underground) geological profile and geological structures within the site.
4. Types of Equipment Used
· Sunto compass, a 20x hand lens, geological pick, topography maps, field maps, camera, Trimble GPS, laptop, satellite images, aerial photographs, geology maps, topography maps, scriber, 10% HCI acid, a field notebook, pencil, coloured pencil, protractor, measuring tape, knife, sample bags, Smartseis STand ES-3000 Seismograph machine, geotechnical auger machine, Geological bulletins.
Please indicate whether you intend to submit a bid by creating a draft response without submitting directly in the system. This will enable the system to send notifications in case of amendments of the tender requirements. Should you require further clarifications, kindly communicate using the messaging functionality in the system. Offers must be submitted directly in the system following this link: http://supplier.quantum.partneragencies.org using the profile you may have in the portal. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration.
Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document.
UNDP Pacific Office in Fiji
PROCUREMENT UNIT